Tools


联系人
Close Contact Layer

联系 Siemens PLM Software


上海市杨浦区大连路500号西门子上海中心B幢4-7楼
上海市 中国 200082

(v) 400 092 0665


Siemens PLM Supplier Information - North America

To become a Siemens supplier, the following steps must be accomplished:

1) Submit required forms to your Siemens contact


For U.S. based suppliers, servicing the U.S.


Beginning April 1, 2011, the appropriate form (590/California vendors, or 587/Vendors not located in California) will be an additional mandatory requirement.


For non-U.S. based suppliers servicing the U.S.

The appropriate tax form listed below (non-U.S. based suppliers should consult their tax advisor to determine which form is applicable for submission to Siemens PLM)


Also required:


Canada

Required forms for Canadian suppliers servicing Canada


The completed forms need to be returned to your Siemens contact.

2) Register on the IOL Portal (Invoices On-Line)

This will provide E-Invoicing for Siemens Suppliers (Paper invoices will be rejected)


Important: Before a supplier can register on the IOL portal website, they must have their new Siemens PLM vendor remit number. This number is seven digits and will begin with a 5 (5xxxxxx). It will be provided to the supplier by their Siemens contact. This number can only be created after Siemens receives the required forms (step 1) back from the supplier.

This number is required to register on the IOL portal.


Register now

Close share layer

Share this page

Share this page through any of the following channels.

Bookmarking Sites

Communities

News

Blogs & Microblogs