Online Seminar Series exploring the latest innovations in Durability Testing and Engineering

웨비나 | 23 9월 2021 - 14 October 2021 | 2 PM CET/ 8 AM EST

Series of 7 online seminars starting 23 September 2021 - 14 October 2021 | 2 PM CET/ 8 AM EST

address durability engineering challenges through Durability Testing and Simulation Solutions

The evolution of the transportation industry deeply impacts durability testing processes. Manufacturers introduce multiple vehicle variants, with lightweight designs and or electrified powertrains. At the same time, consumers’ demand for durable products remains high. Durability testing teams suffer from an increased workload under time pressure.

As such it’s essential to streamline your entire durability testing process. This can be done by integrating rugged and reliable data acquisition hardware with comprehensive processing and analysis software. This way, every step of a typical test campaign is handled in the most efficient way, from channel setup and measurements to validation, consolidation, analysis, and reporting.

Next to this, it’s key to include measurements in simulation. This way road load prediction is done in hours instead of days, calculating the wheels’ displacement on a virtual test rig based on internal loads. Once validated, durability simulation helps to optimize vehicle performance by predicting the impact of material, geometry, and welding changes.

With Simcenter solutions, you execute your entire durability process in less time, with increased confidence, and fewer errors than ever.

Join us for a 7-session online series and learn how to address durability engineering challenges through Durability Testing and Simulation Solutions.

In each session we will include best practices, latest innovations and customer experiences. In each session we will have next to the presenter also a product and an engineering expert present, to answer your questions. At the end of each session there will be an interactive Q&A part.

7 Sessions (90 min each) are foreseen for this event:

  • Basics of Durability- September, 23
    Introduction to the theory of the fundamentals of durability and fatigue life design, considered in the context of functional performance engineering.

    Via real-life examples of fatigue failure, the difference between durability and fatigue is explained, as well as the mechanisms behind crack initiation and propagation. The theory behind the S-N curve and rainflow counting further illustrates possible design strategies against fatigue.

  • Smart load data acquisition in all environmental conditions - September, 28
    Discover how to acquire realistic load data and how to optimize your acquisition process obtaining high-quality data as fast as possible.

    A sucessful durability engineering process starts with gaining a precise understanding of the loads that products will undergo during their anticipated lifetime, for which a state-of-the-art load data acquisition system is crucial to succeed.

  • Efficient and automated data consolidation - September, 30
    During this session we will see how to consolidate, clean up and validate your collected data in an efficient, automated and smart way prior to gaining a precise understanding of the loads and in-depth fatigue life insights.

    Once data has been collected and validated on the spot, quite often it still requires to be consolidated once back in the office with the goal to identify and remove possible signal failures, such as some signal artefacts, spikes, etc.; to correct for some data anomalies, like drifts and offsets; or even to simply filter the data by frequency.

  • Innovative load data and fatigue life analysis - October, 5
    Discover how to analyze public road, proving ground, test rig campaigns and correlate with vehicle durability simulations.

    Innovative load and fatigue analysis solution is crucial to speed up time-consuming tasks such as load data classification, damage potential analysis and experimental fatigue analysis. Accelerate the delivery of critical insights when preparing for test rig campaigns and reliable simulations with durability load data analytics.

  • Creating realistic accelerated durability test schedules - October, 7
    Deploy customer-correlated testing to set realistic vehicle durability targets that match your customer usage profile.

    Once realistic load data from public roads or proving ground has been collected and consolidated, durability-specific characteristics are analyzed and durability targets are set - matching the target customer usage profile. As physical testing is essential but expensive, it is crucial to employ realistic, customer-correlated and accelerated test schedules to keep costs under control and reduce time-to-market.

  • Use test data to perform load data prediction and optimize the design - October, 12
    This session demonstrates how to use test-track measurements in simulation to perform load prediction in hours instead of days. We will show the process how to : build a virtual test rig to excite a model; perform load prediction without characterizing tires and roads; employ an iterative process for early access to vehicle loads; optimize and validate the design by balancing weight; strength and durability; and include advanced materials, weldings and additive manufactured parts in durability simulation.

  • Predictive Maintenance, Condition Monitoring and failure prediction - October, 14
    During this session, we explain how prognostic health management and failure prediction methodologies are applied to quantify the remaining useful lifetime (RUL) of components, subsystem and machines under its specific real-use conditions – instead of determining the ultimate lifetime on a statistical average.

    Data analytics and virtual sensing technology are used to gather deeper system insight during condition monitoring. By connecting the real data with system simulation or CAE 3D simulation in a digital twin, we can take targeted preventive actions before a predicted failure occurs.

Meet the Presenters:

Dr. Michael Hack

Business Product Line Manager, Siemens Digital Industries Software

Dr. Michael Hack is business product line manager for the durability simulation products in Siemens Digital Industries Software. He graduated in applied and computational mathematics (Diplom-Technomathematiker) at the University of Kaiserslautern in Nov. 1992. In Mai 1998 he obtained his Ph.D. The Ph.D. research was in common projects with TecMath GmbH which was acquired by LMS International in 1997. He worked at LMS in method development and as a development manager. From 2000 onwards he switched to product management. As product line manager for the durability product line in the simulation division of LMS he followed numerous research projects and published on hysteresis operators, rainflow counting, thermal fatigue, reliability, and optimization topics. When LMS was acquired by Siemens in 2013 he stayed in this role with an even stronger counterpart in the Siemens research and development teams, new research topics are fatigue of new materials, composites, and influence of new production processes like additive manufacturing.

Ralf Leis

Service Project Manager for „Data Analytics & Durability“, Siemens Digital Industries Software

Graduated from Kaiserslautern University with a degree in Civil Engineering in 2001 and worked for Simcenter Engineering Services team since then as project engineer first, nowadays as service program manager and business development manager for data analytics and durability. He has a long-standing experience in the planning and execution of different kind of durability projects from load measurements, data processing and analysis up to CAE based fatigue life analysis.

Marcos Barral

Presales Solutions Consultant, Siemens Digital Industries Software

Marcos Barral is an EMEA Presales Solutions Consultant, focused on Testing Solutions, for Siemens Digital Industries Software. He graduated in 2008 with a Bachelor’s in Industrial Engineering, specialized in Mechanical Engineering, from the University of Vigo, Spain.

Over the last 12 years Marcos has built strong experience in the NVH field working as Test and Application Engineer, and since 2015 as Presales Solutions Consultant when he joined Siemens Digital Industries Software. He is a passionate about NVH world, being his areas of expertise structural dynamic, rotating machinery, acoustics, durability and dynamic environmental testing, among others.

Swen Vandenberk

Presales Consultant, Siemens Digital Industries Software

Swen Vandenberk is an EMEA Presales Consultant, focused on Testing Solutions, for Siemens Digital Industries Software. Swen graduated Cum Laude as Master of Science in Engineering with specialization in Mechatronics from the Catholic University Of Leuven, Belgium . His fields of studies include Mechanics, Noise and Vibrations, Electromechanics, Robotics, Control Mechanisms and Automation

Safak Has

Business Development Manager Durability Solutions, Siemens Digital Industries Software

Şafak’s previous experience was at Ford Motor Company on vehicle testing of a wide vehicle range from passenger cars to construction trucks. His areas of expertise include data acquisition systems and data analysis in the context of NVH and Durability testing. Şafak Has holds a Bachelor of Engineering in Mechanical Engineering from Yildiz Technical University, Istanbul Turkey.

Please register to join the webinar

We're Sorry!

Sorry, your registration was not successful.

There was an error with the page submission. Please try again. You can also contact for support.

다른 동료 대신 등록하기

Thank you, your information has been received.

Thank you for your registration. You will receive a confirmation email with login information shortly.
다른 동료 대신 등록하기

필수 입력
필수 입력 올바른 이메일 주소를 기입해 주십시오
필수 입력 값이 올바르지 않거나 너무 깁니다
필수 입력 값이 올바르지 않거나 너무 깁니다
필수 입력 값이 올바르지 않거나 너무 깁니다
필수 입력 올바른 전화번호를 기입해 주십시오
필수 입력 값이 올바르지 않거나 너무 깁니다
필수 입력 값이 올바르지 않거나 너무 깁니다