Webinar Series

Analyze the aerodynamics and water management impact of design changes using CFD simulation

Our CFD simulation solutions enable you to accurately assess the impact of design changes on vehicle aerodynamics and water / dirt management.

Realizing aerodynamics innovations for electric vehicles

Check out how to achieve low drag vehicles using computational fluid dynamics (CFD). During this webinar, our guest speaker Enric Aramburu from Applus+ IDIADA introduces the Cronuz project and their experience in using CFD simulation to create an EV compact SUV concept car with breakthrough aerodynamic solutions to reach a 0.19 drag coefficient.

Watch the webinar

Optimizing vehicle aerodynamics for rain water management

Discover how CFD simulation helps in understanding the interaction between rainwater and the external aerodynamic design of the vehicle. Our guest speaker, Michael Ade from Daimler, will introduce the challenges of water management simulation. Then learn how to model design impacts with a complete 3D computational fluid dynamics (CFD) process that accounts for multi-phase flows such as liquid films, sprays, and deposition.

Watch the webinar

Reducing impact of rainwater on ADAS sensors by optimizing vehicle aerodynamics

Get more insights on how to ensure safe and reliable ADAS systems in harsh operating conditions. During this webinar, we will focus on how a realistic simulation including water and dirt management as part of the aerodynamics design, as well as a design space exploration technology, allow OEMs to optimize aerodynamic designs that reduce sensor contamination for safer ADAS systems.

Watch the webinar

Designing under-body components using leading wading simulation methods

Watch our webinar and learn how CFD simulation is used by Jaguar Land Rover to model wading/flooding scenarios and to explore under-body design. Jaguar Land Rover engineers will introduce their patented virtual method to model wading/flooding and a simulation-led failure detection & ingress analysis approach.

Watch the webinar

Accelerate aerodynamics innovation using digital wind tunnels

Get more information on how our experts, with the co-operation of Chalmers University and Volvo cars, are exploring the correlation between test and the digital wind tunnel for a slotted wall wind tunnel. In addition to comparing the physical and digital wind tunnel, the results are also compared to an open road CFD setup to see the impact of the wind tunnel. Finally, our experts will detail a fast method to get even higher throughput on the simulation, allowing the possibility for completing hundreds of design studies in a single week.

Watch the webinar

Optimizing vehicle aerodynamics with cloud-based Computational Fluid Dynamics (CFD) simulation

Interested in engineering and NASCAR? Discover how the NASCAR team from Hendrick Motorsports leverages Microsoft Azure’s cloud platform and the efficient workflow offered by Simcenter CFD solutions to achieve the most pole positions for the 2019 season. Find out the key advantages of a cloud-based CFD simulation solution, how to exploit this efficient workflow in the Azure infrastructure, and how to implement an automated workflow and built-in design exploration.

Watch the webinar

Watch the webinar series below.

Watch first webinar

You may also be interested in the following on-demand webinars.

Our CFD simulation solutions enable you to accurately assess the impact of design changes on vehicle aerodynamics and water / dirt management.

Realizing aerodynamics innovations for electric vehicles

Check out how to achieve low drag vehicles using computational fluid dynamics (CFD). During this webinar, our guest speaker Enric Aramburu from Applus+ IDIADA introduces the Cronuz project and their experience in using CFD simulation to create an EV compact SUV concept car with breakthrough aerodynamic solutions to reach a 0.19 drag coefficient.

Watch the webinar

Optimizing vehicle aerodynamics for rain water management

Discover how CFD simulation helps in understanding the interaction between rainwater and the external aerodynamic design of the vehicle. Our guest speaker, Michael Ade from Daimler, will introduce the challenges of water management simulation. Then learn how to model design impacts with a complete 3D computational fluid dynamics (CFD) process that accounts for multi-phase flows such as liquid films, sprays, and deposition.

Watch the webinar

Reducing impact of rainwater on ADAS sensors by optimizing vehicle aerodynamics

Get more insights on how to ensure safe and reliable ADAS systems in harsh operating conditions. During this webinar, we will focus on how a realistic simulation including water and dirt management as part of the aerodynamics design, as well as a design space exploration technology, allow OEMs to optimize aerodynamic designs that reduce sensor contamination for safer ADAS systems.

Watch the webinar

Designing under-body components using leading wading simulation methods

Watch our webinar and learn how CFD simulation is used by Jaguar Land Rover to model wading/flooding scenarios and to explore under-body design. Jaguar Land Rover engineers will introduce their patented virtual method to model wading/flooding and a simulation-led failure detection & ingress analysis approach.

Watch the webinar

Accelerate aerodynamics innovation using digital wind tunnels

Get more information on how our experts, with the co-operation of Chalmers University and Volvo cars, are exploring the correlation between test and the digital wind tunnel for a slotted wall wind tunnel. In addition to comparing the physical and digital wind tunnel, the results are also compared to an open road CFD setup to see the impact of the wind tunnel. Finally, our experts will detail a fast method to get even higher throughput on the simulation, allowing the possibility for completing hundreds of design studies in a single week.

Watch the webinar

Optimizing vehicle aerodynamics with cloud-based Computational Fluid Dynamics (CFD) simulation

Interested in engineering and NASCAR? Discover how the NASCAR team from Hendrick Motorsports leverages Microsoft Azure’s cloud platform and the efficient workflow offered by Simcenter CFD solutions to achieve the most pole positions for the 2019 season. Find out the key advantages of a cloud-based CFD simulation solution, how to exploit this efficient workflow in the Azure infrastructure, and how to implement an automated workflow and built-in design exploration.

Watch the webinar
Come possiamo aiutarti?