Innovazione e gestione dei programmi sincronizzata e collaborativa per i nuovi programmi
PLANO, Texas, February 10, 2009 – Siemens PLM Software, a business unit of the Siemens Industry Automation Division and a leading global provider of product lifecycle management (PLM) software and services, today responded to the findings from a series of Industry Sector Insight reports unveiled by Aberdeen Group. The reports were based on the findings of benchmark research entitled "Lean Product Development Benchmark Report,” which identified best practices to eliminate waste and non-value added tasks. To further this research, Aberdeen looked at lean product development strategies of five vertical industries and examined key themes for each industry.
Released in January 2009 and spanning Aerospace & Defense, Automotive, Consumer Packaged Goods, High Tech & Electronics and Machinery (Industrial Equipment Manufacturing) industries, the research identified key strategic initiatives and challenges specific to each industry and how manufacturers need to implement lean product development strategies in order to streamline repetitive and redundant processes to shave development time and reduce costs.
“In today’s economy, it is imperative for all companies to have a focused lean product development strategy to increase product efficiency and stay ahead of competition, with a greater emphasis on the bottom line,” said Leif Pedersen, vice president, industry marketing, Siemens PLM Software. “Now more than ever, manufacturers across all industries need to adopt Best-in-Class lean product development practices in order to get their products to market quickly to capture market share while keeping costs down in order to price competitively.”
“Our research reveals that although lean is a familiar word in manufacturing organizations, it is a concept that is just beginning to make headway with product development organizations in most industries,” said Michelle Boucher, research analyst, Product Innovation and Engineering Practice, Aberdeen Group. “By optimizing their lean product development programs, manufacturers streamline their product development processes, improving efficiency and lowering costs.”
A summary of the Aberdeen Sector Insight findings follows:
For the aerospace and defense industry (A&D), bringing products to market is a far more capital and time intensive undertaking with underlying pressures of tightening budgets and customer demand for quality. A&D organizations have been adopting lean initiatives for some time with 43 percent reporting that they have pursued lean initiatives for more than a year. Many A&D organizations have taken great strides toward streamlining product development processes to help bring products to market faster.
A&D companies are ahead of the industry average in adopting value stream mapping capabilities – 64 percent compared to 39 percent respectively. To improve their lean programs, A&D manufacturers are using technology tools such as product data management (PDM) – 65 percent of the A&D industry compared to the industry average of 48 percent. To expand on their lean programs, A&D manufacturers need to continue to streamline product development, empower lean decision makers at all levels of the organization and support lean with planning and automation technologies.
The automotive industry faces global competition and is in need of a program designed to improve the efficiency of processes so that an organization gets products to market faster while keeping costs down. As one of the top strategies the automotive suppliers use to support their lean initiatives, 32 percent of them are increasing the capture and reuse of product and process knowledge while only 10 percent of Best-in-Class have adopted this strategy.
To support their strategies, automotive companies are adopting lean process capabilities on par with the Best-in-Class, specifically 48 percent of automotive suppliers are using design sets for product development compared to 50 percent of the Best-in-Class. The adoption of product data management (PDM) among automotive companies is near that of the Best-in-Class given the strategic attention to capturing and reusing design knowledge – 66 percent compared to 67 percent respectively. However, only 31 percent of automotive companies take advantage of advanced search technologies to sort through information, compared to 53 percent of the Best-in-Class.
Although lean and its principles were first popularized by Toyota Motor Corporation, this industry could still upgrade their lean product development program by empowering lean decision makers at all levels of the organization, involving manufacturing in the product development process and maximizing the efficiency of design reuse.
While the need to reduce costs and streamline product development are not new concepts for the consumer packaged goods (CPG) industry, deploying a lean initiative is perceived as a new notion – only 24 percent of CPG manufacturers indicate they have pursued a formal lean product development initiative for over a year.
Many CPG organizations are taking advantage of technology tools as part of their lean programs, and 43 percent of CPG manufacturers are using specialty tools for lean compared with 21 percent of the industry average. Lean may be a new concept for CPG companies, but to expand on their current programs, they must centralize product knowledge, empower lean decision makers at all levels of the organization and involve manufacturing in the product development process.
High technology and electronics (HTE) companies face everyday pressures such as global competition, market demand for rapid product introduction and limited product development budgets with relatively equal urgency. When it comes to the adoption of the capabilities to ‘lean out’ product development processes, HT&E companies tend to fall around the industry average. However, 74 percent of HT&E manufacturers report a concurrent approach to product design and the development of production processes, compared to 54 percent of the industry average.
Truly ‘leaning out’ product development requires organizations to support the implementation and effectiveness of lean concepts, including authorizing lean process improvements at all levels of the organization, which 53 percent of HT&E companies are adapting to, compared to 35 percent of the industry average. To reach the success that Best-in-Class are having with their lean initiatives, HT&E manufacturers must streamline product development with design sets, empower lean decision makers at all levels of the organization and involve manufacturing in the product development process.
Market demand for rapid product introduction is the top factor driving lean product development for machinery manufacturers, but it’s followed closely by cost pressures in the form of increased global competition and limited budgets. As a top lean strategy, the Best-in-Class are focusing on involving manufacturing in product development, something that is lacking among machinery manufacturers, specifically 35 percent of Best-in-Class and 18 percent of machinery companies.
However, machinery manufacturers are using technology tools to improve their lean capabilities, with 38 percent of them using specialty tools for a better lean program compared to 21 percent of the industry average. Machinery companies report relatively wide adoption of lean strategies. To see more benefit from these initiatives, machinery manufacturers must streamline product development with design sets, empower lean decision makers at all levels of the organization and involve manufacturing in the product development process.
Aberdeen Group examined how more than 483 enterprises develop lean product development programs that would bring products to market faster and reduce costs. To gain an understanding of how manufacturers successfully manage lean product development, respondents were benchmarked according to their performance across five key performance indicators and divided among three performance categories: Best-in-Class (top 20 percent of performers); Laggard organizations (bottom 30 percent) and the Industry Average (the remaining 50 percent). These measures included the percent of products meeting launch dates, revenue targets, product cost targets, development cost targets and quality targets.
As companies look increasingly toward improving product profitability, they must continually look to address the issues of global competition, market demand for rapid product introduction and limited budgets. Siemens PLM Software technology helps customers meet the challenge of turning more ideas into successful products. For more information about how Siemens PLM Software is helping customers address these issues and transform their process of innovation with product lifecycle management software solutions, please visit: www.plm.automation.siemens.com/en_us/industries/.
Full reports can be found at the following links:
Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading global provider of product lifecycle management (PLM) software and services with 5.9 million licensed seats and 56,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm.
The Siemens Industry Automation Division (Nuremberg, Germany) is a worldwide leader in the fields of automation systems, low-voltage switchgear and industrial software. Its portfolio ranges from standard products for the manufacturing and process industries to solutions for whole industrial sectors that encompass the automation of entire automobile production facilities and chemical plants. As a leading software supplier, Industry Automation optimizes the entire value added chain of manufacturers – from product design and development to production, sales and a wide range of maintenance services. With around 42,900 employees worldwide Siemens Industry Automation achieved in fiscal year 2008 total sales of EUR8.7 billion.
Note: Siemens and the Siemens logo are registered trademarks of Siemens AG. All other trademarks, registered trademarks or service marks belong to their respective holders.