Battery Modeling and Simulation Webinar Series

On Demand video coming soon

Driving vehicle electrification

Battery Modeling and Simulation Webinar Series

Developing competitive battery electric vehicles (BEVs) for mass markets is strong on the agenda of automotive OEMs. But the big challenge remains on one key system: the battery. Designing a battery pack is not only a question of design and size optimization to fit within the targeted vehicle packaging. The choice of geometry, chemistry, cell packs, and cooling system has a strong impact on performance, safety, lifetime, and vehicle range. Being able to model different battery pack architectures and simulate the performance within the vehicle context can save considerable development time and push the innovation level forward to meet market expectations.

Webinar 1: Battery Development and Integration | Available On-Demand

Battery modeling and simulation software can accelerate the design and engineering of batteries by virtually exploring design variants and assessing multi-level performance. Our solutions range from system simulation to 3D and CFD simulation, covering the wide scope of engineering domains required for battery systems design. The session will focus on system simulation technology to support battery development and integration.

During this session you’ll learn how to:

  • Size the battery to reach desired vehicle performances.
  • Get a realistic battery model without access to test data.
  • Start vehicle integration analysis with information from cell supplier.
  • How to parametrize an accurate battery model starting from testing or electrochemical simulations.
  • Check vehicle fuel consumption/range, battery safety strategies and its impact on performances and range limitation.

Webinar 2: Optimization of Battery Thermal Management | Available On-Demand

Battery is one of the essential elements for the success of electrified vehicles and their broader democratization. To guarantee an optimal balance between safety, reliability, lifetime and performance, the battery system needs to be considered as a whole, with a special focus on the thermal management aspect. Increasing power demands and fast charging put batteries under thermal stress, thus requiring maintaining battery cells temperatures within in a very restricted range, whatever the environmental or operational conditions. Designing the most appropriate battery thermal management system while keeping costs, time and competitive edge under control requires the deployment of new engineering methodologies where simulation plays an important role. In this webinar, our experts will introduce a multi-physics system simulation approach that can support efficiently the design of battery thermal management systems by providing detailed information on the battery cells temperature within the pack for several cells technologies under different transient scenarios.

During this session, you’ll learn how to:

  • Build a system simulation detailed model of a liquid-cooled battery pack with the support of 3D CFD inputs.
  • Assess battery cells temperatures during a fast-charge scenario.
  • Quickly change design parameters to optimize the cooling system so the meet the temperature requirements.
  • Combine the battery thermal management model with a vehicle to perform drive cycle scenarios.
  • Easily build reliable scalable models from limited available data.

Webinar 3: Improve Battery Fast Charging Experience while Limiting Battery Aging | May 5, 2021 | 3:00 pm (Singapore)

2020 was a prominent year for electric vehicles. The leading OEMs are now engaged in the e-race and customers are ready to adopt what is no longer a trend but a viable option for their daily commutes. The question of performance, maintenance costs, and range of EVs is becoming a thing of the past for customers, who are now focused on the time it takes to charge when taking their EV on a long drive. Although engineers are now proposing fast charging capabilities, optimizing battery module charging control, they must deal with pack thermal management and premature aging prevention. The ultimate objective is to find the correct balance between these attributes.

During this session, you’ll learn how to:

  • Build a system simulation model of a liquid-cooled battery pack.
  • Assess battery cells temperatures during a fast charge scenario.
  • Quickly change design parameters to optimize the cooling system and its control to meet the temperature requirements.
  • Estimate the impact of the charging strategy on battery aging.

Speakers

Raphael Van Der Vorst

Portfolio Development Executive - Simcenter, Siemens Digital Industries Software

Portfolio Development Executive supporting Simcenter and engineering services customers in Asia Pacific. He brings over 20 years of experience in simulation and test. He has a Master’s degree in electromechanical engineering from ECAM Brussels and lives in Singapore.

Lionel Broglia

Business Development Manager, Siemens Digital Industries Software

Lionel is Business Development Manager for System simulation activities, focusing on the electrification ground transportation. He has a master's degree in mechanical engineering and is involved in multi-domain system simulation since 1999.

Chilaka Surendra

Sr Application engineer, MBSE (1D system engineering)

Surendra received a master’s degree in Aeronautical engineering from IIT Kharagpur, India and He has been working with siemens since 2010 and having more than 12 years of experience in model-based system engineering. He is closely involved and supporting various system engineering projects in Aerospace, defence, Automotive and Marine sectors in India. As per his new role since 2021, he supports ASEAN countries as well for system engineering projects in Auto, Aero, defence, off highways, electronics and Marine sectors.

Please register to join the webinar

Register to get an email when this video becomes available

We're Sorry!

Sorry, your registration was not successful.

There was an error with the page submission. Please try again. You can also contact info.di.sisw@siemens.com for support.

Thank you, your information has been received.

Thank you for your registration. You will receive a confirmation email with login information shortly.

Field is required A valid email address is required
Field is required Invalid value or too long
Field is required Invalid value or too long
Field is required Invalid value or too long
Field is required Please add a valid phone number
Field is required Invalid value or too long
Field is required Invalid value or too long

Realize LIVE and User2User | May 26, 2021 | Virtual

Realize LIVE + User2User – Registration Now Open!

Realize LIVE and User2User – Registration Now Open!

For the first time, the Realize LIVE and User2User (U2U) events are becoming one unified content-rich experience. In the company of your peers from across the Siemens Digital Industries Software portfolio, which now includes Siemens EDA, you’ll enjoy a wealth of training and education, inspiration and insight - keeping you on the leading edge of digital transformation.

Have Questions?