Add itemName attribute to Ann3DPartSpecType. Add balloonId to Ann3DBalloonType. Add enumeration values to Ann3DLineWeldSymbol. Add Ann3DLineWeldFinishSymbol enumeration. Add "JIS Z 3021" to Ann3DLineWeldStandardType enumeration. Add projected attribute to Ann3DDimensionType Add attributes to Ann3DLineWeldType: arrowSideFinishSymbol, otherSideFinishSymbol, jisArrowSidePartialPenetrationGrooveWeld, jisOtherSidePartialPenetrationGrooveWeld, jisStaggeredFilletWeld, arrowSideGrooveGap, otherSideGrooveGap, arrowSideGrooveAngle and otherSideGrooveAngle Add support for ModelViews. Add values to Ann3DTextSymbol Add TextLabel sub-element to Ann3DFCFDatumReferenceType Add plm:refType to displayRef in Ann3DOccurrence. Add Ann3DCPSOpenCutterType and Ann3DCPSClosedCutterType. Add support for movable DatumTargets. Add AnnotationOutline element. Add ZeroToleranceDisplay enum, and leading-zero attributes. Add enum values to Ann3DArrow Add UserDefinedSymbolText to Ann3DUserDefinedSymbolType Deprecate layer attribute in Ann3DDisplayType Add Ann3DeMarkingDisplayType type and Ann3DeMarkingDisplay element. PLM XML Annotation Schema sdkname=PlusMinus sdkname=UpperLimit2 sdkname=LowerLimit2 sdkname=UpperLimit1 sdkname=LowerLimit1 sdkname=EUpper sdkname=ELower sdkname=HUpper sdkname=HLower sdkname=SUpper sdkname=SLower sdkname=HUpper sdkname=HLower sdkname=ASME sdkname=ASME2003 sdkname=ANSI sdkname=ANSI sdkname=ASME sdkname=ISO sdkname=ANSI sdkname=JIS language: language of the text. font: text font. The font string is not restricted by this schema. It is up to applications to communicate font definitions. textHeight: text height, in metres. textThickness: thin, normal or thick. textAspect: text character height/width aspect ratio. textColour: text colour. bold: if text is bold. italic: if text is italic. italicAngle: slant angle - positive means leaning to the right, negative means leaning to the left. underline: type of underlining (over or under). justification: justification of text, left, right or centre. spaceFactor: the space between characters, as a multiple of character width. lineFactor: the space between lines, as a multiple of character height. The base type for types describing how to display an Annotation3D element. Attributes: blanked: true if this Display is marked as not to be displayed at the moment. units: specifies which units lengths will be displayed in, If absent, the units in the referencing ProductRevision or ProductRevisionView (if any) will be used. If still absent, millimetres will be assumed. Note this does not affect lengths in the PLMXML file - these are always in metres. symbolColour: colour of the lines in the symbol. layer: layer on which to display (deprecated - use the Layer Property instead) textOrigin: 3D vector describing the location of the top left corner of the text window, in model space, in metres. textDirection: 3D direction of the text, in the display plane. textBox: whether a box is drawn around the symbol. outlineRef: reference to an AnnotationOutline element which specifies the outline of the Annotation. attachmentType: method of display (leader, stacked, as a radial dimension, etc ) symbolicDisplayRef: reference to a Representation which can be considered as a symbolic representation of the Annotation. annotation3DRef: the Annotation3D being displayed (deprecated) Elements: DisplayPlane: The plane on which the Annotation is displayed. If no plane is provided then it is up to the application to choose a plane. Leader: Zero or more leader-line specifications Geometry: Zero or more ConstructionGeometry sub-elements. These are alternative visual representations of the Annotation. These can contain Points or Curves. If these are 2D, then they lie in the DisplayPlane. Annotation3D: the abstract base type for all 3D Annotations Attributes: accountabilityId: group: This is an application specific type used as part of a classification scheme for the annotations. usage: used to indicate a usage other than that expected. uriRefs: associated URI references Elements: Reference: Deprecated. This is for legacy import only, and specifies the entities the Annotation3D refers to. SafetyClassification: This is an application specific type used to indicate the importance of an annotation, e.g. minor, major, critical. ValueToCustomer: This is an application specific type used to indicate the value of an annotation to a customer, e.g. "critical to quality". Keyword: a keyword string (may contain spaces). An Instance of an Annotation3D. Attributes: dimensionStandard: standard to use for dimensions (and other annotations which use the same standards enum) surfaceFinishStandard: standard to use for surface finishes lineWeldStandard: standard to use for line welds displayRef: a reference to an element, derived from Ann3DDisplayType, which specifies how this instance is to be displayed. These attributes are used to over-ride default values set for a containing Ann3DInstanceGroup. Ann3DInstanceGroup. This element is used to collect together a number of Ann3DInstance elements to simplify referencing and allow the specification of default values for appropriate standards Attributes: dimensionStandard: standard to use for dimensions (and other annotations which use the same standards enum) surfaceFinishStandard: standard to use for surface finishes lineWeldStandard: standard to use for line welds displayRef: a reference to an element, derived from Ann3DDisplayType, which specifies how the instances in this group are to be displayed. The above attributes may be overridden by attributes of the same name on the Ann3DInstance sub-elements. Elements: This element inherits 'GDEInstance' sub-elements from its parent type, GDEInstanceGroupType. These sub-elements should all be of type Ann3DInstanceType. An Occurrence of an Annotation3D. Attributes: displayRef: a reference to an element, derived from Ann3DDisplayType, which specifies how this occurrence is to be displayed. These attributes are used to over-ride default values set for Ann3DInstance(Group). Specifies the shape of an Annotation or Text Outline Attributes: type: one of "box", "triangle", "circle", "ellipse", "underline", etc. Note that "underline" refers to the place where the bottom edge of a "box" outline would be placed. It is not the same as underlining the text by means of underline="true". This element can represent a formatted text string, a string with a type (e.g. a real number), or a symbol. This is derived from xsd:string, so it has string element content Attributes: symbol: if this attribute is present, its value specifies the symbol which this text item represents (e.g. "centreline"). In this case, the element content is ignored. format: if present, this attribute specifies the format (type) of the text, e.g. "int", "real", "boolean". outlineRef: reference to an AnnotationOutline element which specifies the outline of the Text Item. The TextGroup attributes override any attributes of the same name in the enclosing Ann3DTextType element. A Text block, i.e. a sequence of text items. Each item may be simple text, text with a type (e.g. a real number), or a symbol. Attributes: textOrientation: orientation of the characters with respect to each other. name: the name of the Text block. This can be used to indicate some particular significance of the text. outlineRef: reference to an AnnotationOutline element which specifies the outline of the Text block. textGroup attributes: The TextGroup attributes act as defaults which are overridden by attributes of the same name in the text items (and override any attributes of the same name in a referencing Annotation3DDisplay element). Elements: Item: at least one Ann3DTextItemType sub-element Ann3DLeaderType: data describing the position, colour, etc, of a leader line Attributes: referenceRef: references the Reference element which references the entity being annotated tParm: t-parameter on the referenced edge or curve, if applicable uvParms: u,v-parameters on the referenced face or surface, if applicable terminator: 3D position of the end of the leader. This, and the next two attributes, are not relevant if explicit leader geometry is given as a sub-element. stubDirection: left or right, initial direction of leader stubLength: length of first segment of leader (metres) colour: leader colour lineType: solid, dashed, dotted, etc thickness: thin, normal or thick arrowType: shape of arrowhead arrowColour: colour of arrowhead arrowLineType: solid, dashed, dotted etc arrowThickness: thin, normal or thick arrowAngle: total angle, in radians, at tip of arrow (0 to pi) arrowLength: length of the arrow dotDiameter: diameter of dot, in metres, if applicable arrowPlacement: in, or out. Refers to arrows inside or outside extension lines arrowOutsideLength: length of segment of leader on outside arrows lineTextGap: gap (metres) between text and start of leader extensionLineGap: gap (metres) between extension line and model geometry extensionLineExtension: length of the portion of the extension line which extends beyond the dimension line extensionColour extension line colour extensionLineType: solid, etc extensionThickness: think, normal or thick Elements: Curve: Leader line geometry represented via a polyline. The schema allows other curve types for expansion. Ann3DDimensionTextType: text to be added to a Dimension, in a specified position Attributes: position: position of text relative to the Dimension Elements: Text: a single Ann3DTextType element Ann3DStatisticalRefinementType: statistical refinement This type will be expanded to contain further information in the future. Ann3DFreeStateRefinementType: Free State refinement This type will be expanded to contain further information in the future. Dimension: 3D Dimension Annotation Attributes: standard: e.g. "ANSI Y..." type: linear, radial, angular or curveLength direction: direction of measurement basic: whether a 'basic' dimension. reference: whether a 'reference' dimension. origin: whether first or second entity is the origin (for directed Dimensions) value: value of dimension, in metres or radians upperDelta: max value minus nominal value, in metres or radians lowerDelta: nominal value minus min value, in metres or radians causality: key, functional, associated or reference grade: deviation: pitchDiaGrade: pitchDiaDeviation: fitGrade: threadClass: projected: true if the Dimension is a projected Dimension, rather than a true value Dimension. Elements: Text - text elements. DimensionDisplay: 3D Dimension display, derived from Annotation3DDisplay Attributes: toleranceDisplay: method of display for tolerance style: style of display - radial, diametral, sphericalRadial, controlledRadial, sphericalDiameter, or ordinate precision: number of decimal places in the value display angleFormat: controls the format of angular values tolerancePrecision: number of decimal places shown in the tolerance unitText: whether to display the unit text (e.g. "inches") dualUnits: units to use for the dual dimension. NB: if this is present, a dual dimension is displayed - otherwise not. dualType: bracket or positional display of the dual dimension dualPlacement: Placment of the dual dimension: before, after, above or below the main dimension dualTolerancePrecision: number of decimal places shown in the dual toleranc dualUnitText: ditto for the dual dimension diameterPlacement: before, after, above or below statisticalPlacement: ditto radialPlacement: ditto linearPlacement: ditto referenceDisplay: how to display reference dimensions - reference, parenthesis, or matched zeroToleranceDisplay: controls the display of a zero valued tolerance dimensionLeadingZero: whether to display leading zeroes in the dimension value toleranceLeadingZero: whether to display leading zeroes in the tolerance value Fastener Annotation Attributes: symbolType: e.g. capScrew, hole, dowel, or other user-defined type threaded: whether threaded or not counterbored: whether counterbored or not diameter[]: array of diameters depth[]: array of depths axisDirection[3]: axis direction of hole etc indexDirection[3]: index direction - user-defined optDirection[3]: optional direction - user-defined type: user-defined type string to define the type of the Fastener fastenerSubType: optional user-defined string to further clarify the type of the Fastener position: position of the Fastener in global space Elements: GeneralText: general text CoordinatedEntity: a text string specifying a related entity in some undefined way SurfaceFinish: derived from Annotation3D Attributes: standard: surface finish standard type: basic, MRR, or MRP modifier: whether modifier added to symbol allAround: whether All Around added to symbol lay: parallel, perpendicular, etc machiningAllowance: also known as materialRemoval upperDelta: upper and lowerDelta: lower tolerance values for the machiningAllowance direction[3]: roughness: maxRoughness: minRoughness: roughnessSpacing: roughnessCutoff: See the relevant Standard for details of these. wavinessHeight: Although these are essentially numeric values, wavinessSpacing: the Standards require them to be strings. roughness2: maxRoughness2: minRoughness2: Elements: ProcessText: Process Text element FeatureControlFrame Annotation Attributes: standard: as for Dimensions characteristic: position, straightness, etc direction: direction of tolerance application allAround: all around symbol maxBonus: true if a max bonus tolerance is used maxBonusValue: max bonus tolerance profileType: profile type profileValue: profile tolerance value profileValue2: profile tolerance value2 (used when there are two compartments) Elements: Text: general Text element ToleranceCompartment: one or more of these sub-elements. If there are two or more, the FCF is composite. Ann3DFCFToleranceCompartmentType: derived from IdBase Attributes: value tolerance value precision number of decimal places modifier lmc, mmc, or rfs zoneShape diametral or spherical projected flag indicating a projected tolerance projectedValue value for projection projectionVector direction of projection tangentPlane ditto, tangent plane freeState ditto, free state Elements: Primary first DatumGroup Secondary 2nd DatumGroup Tertiary 3rd DatumGroup Statistical statistical refinement FreeState free state refinement Ann3DFCFDatumGroupType: derived from IdBase Elements: Datum: one or more DatumReference elements Ann3DFCFDatumReference: derived from IdBase Attributes: modifier lmc, mmc, or rfs datumRef reference to the DatumFeatureSymbol element, if it exists label the label (e.g. "A") of the DatumFeaureSymbol. Elements: TextLabel this sub-element allows for the case where the label is not simple text, but, for example, contains symbols. The label attribute and the TextLabel sub-element should not be used together. DatumFeatureSymbol Annotation Attributes: standard: as for Dimensions label: e.g. "A" datumTargetRefs: Datum Targets associated with this DFS individuallyApplied: DatumTarget Annotation Attributes: standard: as for Dimensions label: label of parent Datum, e.g. "A". Note the Datum Target can exist without a DFS. index: index of the Datum Target in its DFS, if it exists type: point, line, circular, rectangular, cylindrical or arbitrary planar: whether planar or not diameter: diameter, for circular targets innerDiameter: inner diameter, for circular targets length: if rectangular width: if rectangular point1: first point point2: second point - only for cylindrical and line targets movable: true if the DatumTarget is movable (shown as a 'bird-beak' symbol) movableTargetStubDirection: the left/right direction of the bird-beak. movableTargetStubLength: the length of the first segment of the leader (in metres) textStubDirection: if the text of the DatumTarget is outside the DatumTargetSymbol, then this specifies whether the text is to the right or left of the symbol. textStubLength: if the text of the DatumTarget is outside the DatumTargetSymbol, then this specifies the length (in metres) of the stub line joining the text to the symbol. SpotWeld Annotation Attributes: diameter: diameter thickness: thickness of the weld bead thicknesses: number of thicknesses of material being welded type: type of weld, resistance or projection position: location of the spot weld approachDirection: direction weld gun approaches weld clampingDirection: direction in which material is clamped normalDirection: normal vector at point of weld jointId: user specified id for joint weld participates in groupId: user specified id for group weld is in delta: flag indicating weld is "critical" (more important) Elements: ProcessText process text CoordinatedEntity a text string specifying a related entity in some undefined way LineWeld Annotation Attributes: standard: ISO 2556 or ANSI/AWS A2.4-98 arrowSideSymbol: symbol on arrow side of weld otherSideSymbol: symbol shown on other side of the weld arrowSideMainSize: main size of the weld on the arrow side otherSideMainSize: main size of the weld on the other side arrowSideLongitudinalSize: longitudinal size of the weld on the arrow side otherSideLongitudinalSize: longitudinal size of the weld on the other side arrowSideStaggeredSize: staggered size of the weld on the arrow side otherSideStaggeredSize: staggered size of the weld on the other side arrowSideSupplementalSymbol: supplemental symbol on arrow side otherSideSupplementalSymbol: supplemental symbol on other side allAround: flag indicating an all around weld delta: flag indicating weld is "critical" (more important) fieldWeld: indicates weld is applied in the field referenceSign: reference sign is to be included in symbol arrowSideFinishSymbol: Indicates the type of process used to apply a finish to the Arrow side of a Weld otherSideFinishSymbol: ditto, Other side jisArrowSidePartialPenetrationGrooveWeld: Flag indicating the Arrow side of a weld represents a partial penetration groove weld jisOtherSidePartialPenetrationGrooveWeld: ditto, Other side jisStaggeredFilletWeld: Flag indicating that the JIS fillet weld is to be staggered arrowSideGrooveGap: Gap applied to the Arrow side of a groove weld otherSideGrooveGap: ditto, Other side arrowSideGrooveAngle: Angle applied to the Arrow side of a groove weld otherSideGrooveAngle: ditto, Other side Elements: ProcessText: process text CoordinatedEntity: text string specifying a related entity in an undefined way Ann3DSpec: base type for Specification annotations Attributes: identifier: unique identifier for the specification revision: revision of the specification MaterialSpec: used to specify the material used in manufacture Elements: Nomenclature: Textual information about the material OpenField: Additional information ProcessSpec: used to specify the process used in manufacture Elements: Nomenclature: Textual information about the process OpenField: Additional information PartSpec: derived from Ann3DSpec Part identification based on MIL-STD-100 Attributes: itemName: nameModifier: descriptiveModifier: An Annotation which specifies an associated organisation. The Ann3DInstance which references this Annotation should also reference an Organisation and/or Site element. Note Annotation Attributes: standard: standard applicable to the Note identifier: identifier of the Note category: category of the Note revision: revision of the Note Elements: Text: Zero or more blocks of text. Note display. Balloon Annotation (derived from Note). Attributes: balloonId: String giving the letter(s) displayed inside the Balloon circle. MeasurementPoint: derived from Annotation3D Attributes: level: level of measurement point use in process measurementDirection: direction CMM approaches measurement point coordinationDirection: direction for coordinating with another part normalDirection: normal vector at point of measurement point position: location of the measurement point Elements: CoordinatedEntity: text string specifying a related entity in an undefined way Locator Annotation. Attributes: symbol: Main type of the Locator Symbol. e.g. hole, edge, surface, etc. One of the following is required, depending on the value of symbol mainEdgeType: If symbol is edge, indicates thge type of the Edge Locator mainHoleType: If symbol is hole, indicates the type of the Hole Locator mainSurfaceType: If symbol is surface, indicates the type of the Surface Locator mainRectSlotFreeformType:If symbol is recangular, slot or freeform indicates the type of the Rectangular, Slot or Freeform Locator subtype: Indicates the subtype of the Locator coordinatePlane: Indicates the coordinate plane for which the Locator limits the degrees of freedom of the Part functionalSubscript: Indicates which functional subscripts are applicable. These are (may include more than one): O - Dies, molds, checking fixtures for individual parts S - Sub-assembly prior to framing K - Sub-assembly locators in checking fixtures C - Assembly fixtures for framing prior to paint F - Trim and final assembly after paint changeLevel: Indicates how easy it is (for the overall process) to allow change to this Locator. punchDirection[3]: punch direction - direction in which punch approaches part pinDirection[3]: pin direction - direction in which part is pinned normalDirection[3]: normal direction - normal vector at this locator hotSpotPosition: position of the Hot Spot for the Locator in global space Elements: PartNumber: a user entered string indicating the part number Note: a user entered string, free text CoordinatedEntity: a text string specifying a related entity in an undefined way Attributes: precision: number of decimal places Text to be added to a User Defined Symbol in a specified position and orientation Attributes: origin: position of start of text, in the display plane direction: direction of text Elements: Text: a single Ann3DTextType element (required) UserDefinedSymbol Annotation. Note that the textOrigin and textDirection attributes on Ann3DisplayType do not apply to this Annotation. Attributes: lineStyle: The style applied to the lines in the User Defined Symbol scale: Scale factor applied to the symbol filename: name of the file used to define the symbol Elements: Line: One element for each line in the symbol Arc: One element for each arc in the symbol Circle: One element for each circle in the symbol Ellipse: One element for each ellipse in the symbol Spline: One element for each spline in the symbol UserDefinedSymbolText: Positioned and oriented Text blocks validate=skipName CircleCentre Annotation. Attributes: diameter: specifies the diameter of the circle if not derived from the tracked geometry diameterOverride: indicates whether the diameter of any tracked geometry is overridden by the value specified in diameter. axisDirection[3]: axis direction of hole etc. normalDirection[3]: normal direction position: position of the Circle Centre in model space Elements: CoordinatedEntity: a text string specifying a related entity in some unspecified way CircleCentre Display. Attributes: precision: number of decimal places used in the display displayType: flatToScreen or flatToSurface CoordinateNote Annotation Attributes: standard: standard used in for the Coordinate Note textBox: Indicates whether or not the note has a box around it includeX: Indicates whether or not to include the X coordinate of the tracked entity xPrefix: User specified prefix for X coordinate xSuffix: User specified suffix for X coordinate includeY: Indicates whether or not to include the Y coordinate of the tracked entity yPrefix: User specified prefix for Y coordinate ySuffix: User specified suffix for Y coordinate includeZ: Indicates whether or not to include the Z coordinate of the tracked entity zPrefix: User specified prefix for Z coordinate zSuffix: User specified suffix for Z coordinate includeI: Indicates whether or not to include the I component of the tracked entity Only meaningful if the tracked entity has a normal vector iPrefix: User specified prefix for I coordinate iSuffix: User specified suffix for I coordinate includeJ: Indicates whether or not to include the J component of the tracked entity Only meaningful if the tracked entity has a normal vector jPrefix: User specified prefix for J coordinate jSuffix: User specified suffix for J coordinate includeK: Indicates whether or not to include the K component of the tracked entity Only meaningful if the tracked entity has a normal vector kPrefix: User specified prefix for K coordinate kSuffix: User specified suffix for K coordinate includeLabel: Indicates whether or not to include the Label of the tracked entity labelPrefix: User specified prefix for Label labelSuffix: User specified suffix for Label includeLevel: Indicates whether or not to include the Level of the tracked entity Only meaningful if the tracked entity is a measurement point levelPrefix: User specified prefix for Level levelSuffix: User specified suffix for Level CoordinateNote Display Attributes: precision: number of decimal places This element gives the name of an Attribute and optionally a URI reference to it. The name is the element content. Attributes: attributeRef: reference to the attribute. AttributeNote Annotation. Attributes: standard: standard used for the AttributeNote Elements: AttributeName: Attribute name. The values of the named attributes are used to construct the AttributeNote text. AttributeReference: Attribute name and reference. This is similar to AttributeName above, but allows a URI reference to the actual attribute. Do not use AttributeName elements and AttributeReference elements at the same time. AttributeNote Display Attributes: includeLabels: Indicates whether or not the labels for the attributes are included in the note text BundleDressingNote Annotation. Attributes: standard: Standard used in for the Bundle/Dressing Note type: Indicates whether the Bundle/Dressing Note is for a Bundle or a Dressing locationOnCurve: The location (parameter) along the wirepath where the leader attaches for leader directed Bundle/Dressing Notes Elements: AttributeName: A list of bundle or dressing attribute names. The values of the named attributes are used to construct the BundleDressingNote text. AttributeReference: Attribute name and reference. This is similar to AttributeName above, but allows a URI reference to the actual attribute. Do not use AttributeName elements and AttributeReference elements at the same time. BundleDressingNoteDisplay. Attributes: precision: number of decimal places includeLabels: Indicates whether or not the labels for the attributes are included in the note text PlaneCutter. Attributes: materialSide: Defines whether or not the normal for the cutting plane indicates the side from which to remove the material. True means the normal for the plane indicates the side from which to remove material, false means the opposite of the plane normal is the side from which to remove material. Elements: Plane: The cutting plane. OpenPolylineCutter. This element is deprecated - use Ann3DCPSOpenCutterType in preference. Attributes: materialSide: Indicates which side of the cut contains material: First, take the vector cross product of the constraint plane and the vector formed from the first line segment of the polyline. materialSide of true indicates this cross product shows the side from which material is removed. materialSide of false indicates the opposite side has the material removed. Elements: ConstraintPlane: Equation defining the constraint plane Polyline: Data for the points selected to define the polyline cutter ClosedPolylineCutter. This element is deprecated - use Ann3DCPSClosedCutterType in preference. Attributes: materialSide: Indicates which side of the cut contains material - materialSide of true indicates this is a "Cut" (where the shape represented by the closed polyline curve is removed from the original Part) and a value of false indicates this is an "Intersect" (where only the material from the original Part that intersects with the volume defined by the cutting plane symbol is retained). aftThroughAll: Indicates whether or not the extrusion in the Aft direction is "Through All" aftDistance: The distance the extrude is performed in the Aft distance foreThroughAll: Indicates whether or not the extrusion in the Fore direction is "Through All" foreDistance: The distance the extrude is performed in the Fore distance Elements: ConstraintPlane: Equation defining the constraint plane Polyline: Data for the points selected to define the polyline cutter Open Cutter. Attributes: materialSide: Indicates which side of the cut contains material: First, take the vector cross product of the constraint plane normal and the tangent at the start of the curve. materialSide of true indicates this cross product shows the side from which material is removed. materialSide of false indicates the opposite side has the material removed. curveRef: reference to the curve which defines the cut. This may be a CompositeCurve. Elements: ConstraintPlane: Plane in which the curve lies. Closed Cutter. Attributes: materialSide: Indicates which side of the cut contains material - materialSide of true indicates this is a "Cut" (where the shape represented by the closed curve is removed from the original Part) and a value of false indicates this is an "Intersect" (where only the material from the original Part that intersects with the volume defined by the cutting plane symbol is retained). The constraint plane normal defines the "fore" direction; the opposite is the "aft" direction: aftThroughAll: Indicates whether or not the extrusion in the Aft direction is "Through All" aftDistance: The distance the extrude is performed in the Aft distance, in metres. foreThroughAll: Indicates whether or not the extrusion in the Fore direction is "Through All" foreDistance: The distance the extrude is performed in the Fore distance, in metres. curveRef: reference to the closed curve which defines the cut. This may be a CompositeCurve. Elements: ConstraintPlane: Plane in which the curve lies. CuttingPlaneSymbol Annotation. Attributes: Elements: CpsLetters: The name displayed with the Cutting Plane Symbol in the graphics region. This is not the system ID for the symbol. Elements: One (and only one) of the following: PlaneCutter: Data for a Plane cutter OpenPolylineCutter: Data for an open polyline cutter ClosedPolylineCutter: Data for a closed polyline cutter OpenCutter: Data for an open polyline cutter ClosedCutter: Data for a closed polyline cutter CuttingPlaneSymbolDisplay Attributes: twoArrows: Indicates whether one or two arrows are used in the cutting plane symbol Crosshatch Annotation Attributes: rotate: Indicates whether or not the crosshatch pattern is rotated pattern: The pattern used for the Crosshatch spacing: The spacing between the lines in the Crosshatch, in metres angle: The angle (in radians) of the lines in the crosshatch from the X direction for the symbol eMarking Annotation (derived from Note). The eMarking annotation indicates governmental, legal, and proprietary controls over products. Attributes: type: type of information Ann3DeMarkingDisplay Ann3DGroup (derived from GDE). This element represents a collection of 3D Annotations. It instances its Annotations via the gdeInstanceRefs attribute, in other words the Annotations are regarded as sub-structure. Annotation3DGroup: This element is deprecated. Attributes: dimensionStandard: standard to use for dimensions (and other annotations which use the same standards enum) surfaceFinishStandard: standard to use for surface finishes lineWeldStandard: standard to use for line welds Elements: any number of Dimensions, Fasteners, etc etc, and corresponding Display elements.